JGC0348
Page 1 of 2
The 0348 series is designed to mount to pads on the lower side of a PCB with the LED viewed through a hole. This has the benefit of maintaining all parts of the LED below the surface of the PCB, making it especially suitable for use with membrane overlays and applications where a smooth front surface is desired.
Chip PART NO. Material JGC0348 AlGaInP Emitted Color Super Yellow Green Water Clear Lens Color
* Specifications subject to change without notice. Dimensions are in mm0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507
JGC0348
Page 2 of 2
Absolute Maximum Ratings at Ta = 25 C Parameter Forward Current Operating Temperature Storage Temperature Soldering Temperature Electrostatic Discharge Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHz) Reverse Voltage Electronic Optical Characteristics Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol IV 21/2 p d VF IR Min. 11 -- -- -- -- -- -- Typ. 16 130 575 573 20 2.0 -- Max. -- -- -- -- -- 2.4 10 Units mcd deg nm nm nm V A Condition IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V Symbol IF Topr Tstg Tsol ESD Pd IF (Peak) VR Rating 25 -40 to +85 -40 to +90 260 (for 5 seconds) 2000 60 60 5 Units mA C C C V mW mA V
* Specifications subject to change without notice. Dimensions are in mm0.1 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0507
|
